, , , ,

QNAP TL-R1620Sep-RP


ZFS-based, 24-bay U.2 NVMe all-flash storage built for high-performance and low-latency virtualized workloads, data centers, and 8K streams

Pretul afisat nu contine TVA (19%).
Dupa comanda, v
a rugam asteptati confirmare stoc.

13.827,53 lei

TL-R1620Sep-RP

Drive Bay 16 x 3.5-inch SAS 12Gb/s, SAS/SATA 6Gb/s

The system is shipped without HDD.
For the HDD compatibility list, please visit https://www.qnap.com/compatibility/
Drive Compatibility 3.5-inch bays:
3.5-inch SAS/SATA hard disk drives
2.5-inch SAS/SATA hard disk drives
2.5-inch SAS/SATA solid state drives
Hot-swappable
Form Factor 3U Rackmount
Host Interface 4 x 12Gb/s SAS 3.0 wide ports (4-wide port) Mini-SAS HD (SFF-8644)
LED Indicators Front panel: HDD 1-16, Power, Status, Link, Fan error
Rear panel: SAS connector, Enclosure ID
Buttons Power
Dimensions (HxWxD) 131.3 × 482.2 × 425.3 mm
Weight (Net) 11.48 kg
Weight (Gross) 16.01 kg
Max. number of HDDs/SSDs supported 16
Hard Drive Type 3.5″ or 2.5″ SAS 12Gb/s, SAS/SATA 6Gb/s and 3Gb/s drives
Operating Temperature 0 – 40 °C (32°F – 104°F)
Storage Temperature -20 – 70°C (-4°F – 158°F)
Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit 550W(x2), 100-240V
Power Consumption: Operating Mode, Typical 207.13 W

Tested with drives fully populated.
Fan 3 x 80mm, 12VDC
System Warning Buzzer
Management Managed via QNAP QTS / QuTS hero OS
1. Supports disk S.M.A.R.T. information
2. RAID expansion enclosure identifier
3. Locate RAID expansion enclosures
4. Locate hard disks on RAID expansion enclosure
5. Smart fan control by detecting system and hard drive temperature
6. In-band SAS firmware update
SKU: TL-R1620Sep-RP Categorii: , , , ,

Acumulat din 0 comentarii

0.0 overall
0
0
0
0
0

Doar clientii autentificati, care au cumparat acest produs pot lasa un comentariu

Nu sunt comentarii despre acest produs

conecteaza-te
ai nevoie de ajutor?
Buna ziua
Cu ce te putem ajuta?