QNAP NAS STORAGE TOWER 4BAY 1U / NO HDD TS-433EU QNAP (TS-433EU)
Hardware Specs
| CPU | ARM 4-core Cortex-A55 2.0GHz processor |
| CPU Architecture | 64-bit ARM |
| Graphic Processors | Mali-G52 |
| Floating Point Unit | |
| Encryption Engine | |
| Hardware-accelerated Transcoding | |
| Neural Processing Unit (NPU) | |
| System Memory | 4 GB on board (non-expandable)
Note: Reserves some RAM for use as shared graphics memory.
|
| Maximum Memory | 4 GB on board (non-expandable) |
| Flash Memory | 4 GB (Dual boot OS protection) |
| Drive Bay | 4x 3.5-inch SATA 6Gb/s, 3Gb/s |
| Drive Compatibility | 3.5-inch bays: 3.5-inch SATA hard disk drives 2.5-inch SATA solid state drives |
| Hot-swappable | |
| 2.5 Gigabit Ethernet Port (2.5G/1G/100M) | 2 (2.5G/1G/100M) |
| Wake on LAN (WOL) | |
| Jumbo Frame | |
| USB 3.2 Gen 1 port | 2 |
| Form Factor | 1U Short Depth Rackmount |
| LED Indicators | System Status, LAN, USB, HDD1~4 |
| Buttons | Power, Reset |
| Dimensions (HxWxD) | 43.3 × 430 × 292.3 mm |
| Weight (Net) | 4.01 kg |
| Weight (Gross) | 5.9 kg |
| Operating Temperature | 0 – 40 °C (32°F – 104°F) |
| Storage Temperature | -20 – 70°C (-4°F – 158°F) |
| Relative Humidity | 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
| Power Supply Unit | 60W, 100-240VAC |
| Power Consumption: HDD Sleep Mode | 9.32 W |
| Power Consumption: Operating Mode, Typical | 23.74 W
Tested with drives fully populated.
|
| Fan | 3 x 40mm, 12VDC |
| System Warning | Buzzer |
| Kensington Security Slot | |
| Standard Warranty | 2 |
| Max. Number of Concurrent Connections (CIFS) – with Max. Memory | 200 |
Ubiquiti UISP Isolator Radome for 620 mm Dish Reflector - IsoBeam™ (ISO-Beam-620)
UI Care - Enterprise Access Hub (EAH-8)
Ubiquiti UniFi PoE+ Adapter (30W) (U-POE-at) 












Nu sunt comentarii despre acest produs