| Hardware |
| Type |
Outdoor |
| Number of Radios |
2 Wi-Fi + LoraWAN + 1 LTE + 1 GNSS |
| Number of Antennas |
5 External Antennas |
| Antenna Type Support |
N Type: 5 Antennas |
| Antenna Type and Peak Gain |
Wi-Fi LoraWAN LTE GNSS 5 dBi Omni 4 dBi Patch @2.4GHz Directional 2.7 dBi 6.5 dBi 4 dBi @5GHz |
| Frequency Bands (GHz) |
2.4GHz Band: 5GHz Band: 2.4-2.484GHz U-NII-1: 5.15-5.25GHz U-NII-2A: 5.25-5.35GHz U-NII-2C: 5.47-5.725GHz U-NII-3: 5.725-5.85GHz U-NII-4: 5.85–5.925GHz |
| 2.4GHz Wi-Fi Capabilities |
Frequency band: 2.4GHz Channel width: 20/40MHz Modulation: BPSK, QPSK, 64 – 4096 QAM MIMO Chains: 2×2 Service Radio |
| 5.0GHz Wi-Fi Capabilities |
Frequency band: 5.0GHz UNII-1 to UNII-4 Channel width: 20/40/80/160/240MHz Modulation: BPSK, QPSK, 64 – 4096 QAM MIMO Chains: 2×2 Service Radio |
| WiFi Data Rate |
2.4GHz band: up to 688 Mbps 5.0GHz band: up to 4.324 Gbps |
| Wi-Fi TX Power maximum |
2.4GHz band: 25 dB/316 mw |
| (2 chains combined) |
5.0GHz band: 26 dB/400 mw |
| LoraWAN |
US Europe |
| Frequency |
902-928 MHz 863 – 870 MHz |
| Channels |
8× 125 kHz uplink 8× 125 kHz uplink (902.3–914.9 MHz) (868.1–868.5 MHz) 1× 500 kHz downlink 1× 125 kHz downlink (923.3–927.5 MHz) (869.525 MHz) |
| Spreading Factor |
SF7 – SF12 SF7 – SF12 |
| TX Power |
26 dBm 14 dBm |
| RX Sensitivity |
-139 dBm -139 dBm |
| LTE Frequency |
Worldwide |
| 4G |
B1, B2, B3, B4, B5, B7, B8, B8_US B9, B12, B13, B14, B18, B19, B20, B25, B26, B28 |
| 3G |
B1, B2, B4, B5, B6, B8, B19 |
| 2G |
B2, B3, B5, B8 |
| LTE data rate |
Down link: 150 Mbps Uplink: 50 Mbps |
| LTE SIM management |
eSIM |
| Bluetooth Low Energy |
No |
| (BT/BLE) Radio |
| Trusted Platform Module |
Yes |
| (TPM) |
| GNSS |
GPS L1 C/A: 1575.42 MHz, GLONASS L1: 1598.0625–1605.375 MHz BeiDou : 1561.098 MHz, Galileo E1: 1575.42 MHz Supports for multi-GNSS including QZSS and SBAS ranging Indoor and outdoor multi-path detection and compensation GNSS sensitivity -165 dBm (Tracking), -148 dBm (acquisition) |
| Interfaces |
Port 1: 1× RJ-45 Multi-Gigabit Ethernet (100 M / 1 G / 2.5 G), 802.3bt PoE-IN Port 2: 1× RJ-45 Multi-Gigabit Ethernet (10M / 100 M / 1 G), 802.3af PoE-OUT Console: 1× RJ-45 Serial Console (RS-232) |
| Power over Ethernet (PoE) |
x1 802.3bt PoE |
| Highlights |
| FortiAP 432G |
| This enterprise class 802.11a |
x ruggedized indoor/outdoor AP provides three radios for tri |
| access on radio capable of fo |
ur spatial streams. As a Wi-Fi 6E access point it provides 6 |
| band operation, OFDMA, a 10 G |
igabit Ethernet port, plus an additional 1 Gbps Ethernet por |
| with PoE out. The integrated |
BLE radio can be used for beacons and locationing applicatio |
| Note: For FAP-432G, use of th |
e 6GHz band is subject to regional regulatory authority appr |
| 802.11ax | Tri-Radio 2. |
4 GHz + 5 GHz + 6 GHz | 8 External Antennas |
| 4×4 MU-MIMO | Up to 114 |
8 Mbps + 2402 Mbps + 4804 Mbps |
| FAP-432G |
FAP-432G Pole/Wall Mounting FortiGate, FortiEdge Cloud, or SASE-ma |
| Specifications |
| F |
ortiAP 432G |
| Hardware |
| Hardware Type W |
i-Fi 6E 4×4 MIMO Outdoor AP |
| Number of Radios 3 |
+ 1 BLE |
| Number of Antennas E |
xternal: x4 Dual band WiFi + x4 Tri-band WiFi and Scanning + |
| x |
1 2.4GHz band BLE/ZigBee |
| Antenna Type Support N |
-Type (9 total): Dual Band Antenna (4); Tri Band Antenna (4) |
| B |
LE/Scan antenna (1) |
| Antenna Type and Peak O |
mni Directional antenna. |
| Gain |
| D |
ual band: 5.1 dBi for 2.4GHz, 6.4 dBi for 5 GHz |
| T |
r-band: 4.9 dBi for 2.4GHz, 5.8 dBi for 5 GHz, and 6.0dBi fo |
| b |
and |
| B |
LE Antenna: 4.7dBi for 2.4GHz |
| G |
PS Antenna: ceramic patch circular polarized: 3.0dBi Peak ga |
| Antenna Beam width W |
i-Fi: |
| 2 |
.4GHz Band: 360° Horizontal and 65° Vertical |
| 5 |
.0GHz Band: 360° Horizontal and 50° Vertical |
| 6 |
.0GHz Band: 360° Horizontal and 65° Vertical |
| B |
LE: 2.4GHz Band: 225° Horizontal and 55° Vertical |
| G |
PS: 1.5‑1.6GHz Band: 360° Horizontal and 98° Vertical |
| Supported Frequency 2 |
.4-2.484GHz 5.925–6.425GHz |
| Bands (GHz)* 5 |
.15-5.25GHz 6.425–6.525GHz |
| 5 |
.25-5.35GHz 6.525–6.875GHz |
| 5 |
.47-5.725GHz 6.875–7.125GHz |
| 5 |
.725-5.85GHz |
| Radio 1 Capabilities F |
requency band: 2.4GHz |
| C |
hannel width: 20/40MHz |
| M |
odulation: BPSK, QPSK, 64/256/1024 QAM |
| M |
IMO Chains: 4×4 Service |
| Radio 2 Capabilities F |
requency band: 5.0GHz |
| C |
hannel width: 20/40/80MHz |
| M |
odulation: BPSK, QPSK, 64/256/1024 QAM |
| M |
IMO Chains: 4×4 Service |
| Radio 3 Capabilities F |
requency band: 2.4GHz, 5.0GHz, and 6.0GHz |
| C |
hannel width: 20/40/80/160MHz |
| M |
odulation: BPSK, QPSK, 64/256/1024 QAM |
| M |
IMO Chains: 4X4 Service (2×2 when Scanning) |
| Maximum Data Rate R |
adio 1: up to 1182 Mbps |
| R |
adio 2: up to 2475 Mbps |
| R |
adio 3: Up to 4804 Mbps |
| Bluetooth Low Energy B |
luetooth scanning and iBeacon advertizement |
| Radio @ |
10 dBm max TX power |
| Trusted Platform Module Y |
es |
| (TPM) |
| GNSS |
| Supported Bands G |
PS L1 C/A, QZSS L1 C/A: 1575.42 MHz, |
| G |
LONASS L1: 1598.0625–1605.375 MHz |
| B |
DS B1I : 1561.098 MHz, Galileo E1: 1575.42 MHz |
| Default constallations G |
PS + GLONASS + BDS + Galileo + QZSS |
| Tracking channels 4 |
7 |
| Concurrent GNSS 5 |
| SBAS W |
AAS, EGNOS, MSAS and GAGAN |
| Sensitivity (@ default A |
cquisition: -147 dBm | Tracking: -166 dBm | |
| constallations) R |
eacquisition: -159 |
| Interfaces x |
1 10GBASE-T/5GBASE-T/2.5GBASE-T/1000BASE-T/100BASE- |
| T |
X/10BASE-Te RJ45, x1 10/100/1000 Base-T RJ45, |
| x |
1 RS-232 RJ45 Serial Port |
| MDI/MDIX S |
upported |
| Power over Ethernet (PoE) 8 |
02.3bt PoE on LAN1/10G PoE port |
| PSE OUT 8 |
02.3af power on LAN2/1G PSE port |
| Simultaneous SSIDs U |
p to 8 per client serving radio |
| ( |
7 if background scanning is enabled) |
| EAP Type(s) E |
AP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/ |
| E |
AP-GTC, EAP-SIM, EAP-AKA, EAP-FAST, EAP‑TTLS/PAP |
| User/Device W |
PAâ„¢, WPA2â„¢, and WPA3â„¢ with 802.1x or Preshared key, WE |
| Authentication C |
aptive Portal, MAC blacklist and whitelist |
| Maximum Tx Power R |
adio 1: 2.4GHz: 29.8 dBm / 955 mW (4 chains combined)* |
| R |
adio 2: 5GHz: 29.8 dBm / 955 mW (4 chains combined)* |
| R |
adio 3: 6GHz: 26 dBm / 400 mW (4 chains combined @ 160MHz |
| B |
W)* FortiGate, FortiEdge Cloud, or SASE-managed a |
Nu sunt comentarii despre acest produs