Ubiquiti Unifi Access Point U7 Professional (U7-Pro)
WiFi 7 with 6 GHz support
140 m² (1,500 ft²) coverage
300+ connected devices
Powered using PoE+
2.5 GbE uplink
Note. 6 GHz operation is supported in these countries.
Multi-Link Operation (MLO) capability to be provided via software update in February 2024.
Can I install U7 Pro using an existing AP mounting plate?
U7 Pro uses the AP Professional Mounting System. It can be installed using the same metal mounting plate as the following AP models:
- U6-Enterprise
- U6-Pro
- U6-LR
- UAP-AC-Pro
- UAP-AC-HD
- UAP-AC-SHD
- UAP-AC-XG
U7 Pro is managed with UniFi Network 8.0.26 and later.
U7 Pro is powered by PoE+ with a 2.5 GbE uplink. We recommend pairing U7 Pro with a UniFi PoE switch that features 2.5 GbE performance and PoE+ output, such as Professional Max and Enterprise PoE switches.
U7 Pro is fully backwards compatible with WiFi 6E and earlier client devices. A WiFi 6E or WiFi 7 client device is required to utilize the 6 GHz band.
Yes, a fully customizable cover will be available in the second quarter of 2024 for U7 Pro.
| Mechanical | ||
|---|---|---|
| Dimensions | Ø206 x 46 mm (Ø8.1 x 1.8″) | |
| Weight | 680 g (1.5 lb) | |
| Enclosure materials | Polycarbonate, metal | |
| Mount material | Mounting bracket: stainless steel (SUS304) Backing plate: galvanized steel (SGCC) |
|
| Hardware | ||
| Networking interface | (1) 2.5 GbE RJ45 port | |
| Management interface | Ethernet | |
| Power method | PoE+ | |
| Power supply | UniFi PoE switch | |
| Supported voltage range | 44—57V DC | |
| Max. power consumption | 21W | |
| Max. TX power 2.4 GHz 5 GHz 6 GHz |
22 dBm 26 dBm 23 dBm |
|
| MIMO 2.4 GHz 5 GHz 6 GHz |
2 x 2 2 x 2 2 x 2 |
|
| Throughput rate 2.4 GHz 5 GHz 6 GHz |
688 Mbps 2882 Mbps 5765 Mbps |
|
| Antenna gain 2.4 GHz 5 GHz 6 GHz |
4 dBi 6 dBi 5.8 dBi |
|
| LEDs | White/blue | |
| Button | Factory reset | |
| Mounting | Wall/ceiling (Included) | |
| Operating temperature | -30 to 60° C (-22 to 140° F) | |
| Operating humidity | 5 to 95% noncondensing | |
| Certifications | CE, FCC, IC | |
| Software | ||
| WiFi standards | 802.11a/b/g/n/ac/ax/be | |
| Wireless security | WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3/PPSK) | |
| BSSID | 8 per radio | |
| VLAN | 802.1Q | |
| Advanced QoS | Per-user rate limiting | |
| Guest traffic isolation | Supported | |
| Concurrent clients | 300+ | |
| Supported Data Rates | ||
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps | |
| 802.11b | 1, 2, 5.5, 11 Mbps | |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps | |
| 802.11n | 6.5 Mbps to 300 Mbps (MCS0 – MCS15, HT 20/40) | |
| 802.11ac (WiFi 5) | 6.5 Mbps to 1.7 Gbps (MCS0 – MCS9 NSS1/2, VHT 20/40/80/160) | |
| 802.11ax (WiFi 6) | 7.3 Mbps to 2.4 Gbps (MCS0 – MCS11 NSS1/2, HE 20/40/80/160) | |
| 802.11be (WiFi 7) | 7.3 Mbps to 5.7 Gbps (MCS0 – MCS13 NSS1/2, EHT 20/40/80/160/240/320) | |
| Application Requirements | ||
| UniFi Network | Version 8.0.7 and later | |
| UniFi OS | Version 3.2 and later |
Acumulat din 0 comentarii
Doar clientii autentificati, care au cumparat acest produs pot lasa un comentariu
Produse similare
-
Ubiquiti, UISP, Wireless, Wireless
Ubiquiti airMAX NanoBeam 2AC 13 dBi Station (NBE-2AC-13)
High-Performance airMAX® ac Bridge
Incorporating innovative industrial design with proprietary airMAX® ac technology, the NanoBeam® AC is ideal for CPE deployments requiring maximum performance from the smallest possible footprint.
2.4GHZ 5GHZ 450+MBPS 10+ kmRANGE
SKU: NBE-2AC-13 -
Meraki, wireless LAN, Wireless
Meraki MR30H
802.11ac Wave 2 wireless with integrated gigabit switch
The Cisco Meraki MR30H is a quad-radio, cloud-managed 2×2:2 802.11ac Wave 2 wall switch access point with MU-MIMO support. Designed for next-generation deployments in hotel rooms, university residences, and other multi-dwelling units, the MR30H provides performance, enterprise-grade security, and simple management.
SKU: MR30H-HW
Nu sunt comentarii despre acest produs